Effect of welding on microstructure and mechanical response of X100Q bainitic steel through nanoindentation, tensile, cyclic plasticity and fatigue characterisation
Devaney, Ronan J. O'Donoghue, Padraic E. Leen, Sean B.
Devaney, Ronan J.
O'Donoghue, Padraic E.
Leen, Sean B.
Loading...
Repository DOI
Publication Date
2020-12-30
Type
Article
Downloads
Citation
Devaney, Ronan J., O'Donoghue, Padraic E., & Leen, Seán B. (2021). Effect of welding on microstructure and mechanical response of X100Q bainitic steel through nanoindentation, tensile, cyclic plasticity and fatigue characterisation. Materials Science and Engineering: A, 804, doi:https://doi.org/10.1016/j.msea.2020.140728
Abstract
This paper presents an experimental characterisation of fatigue at welded connections for the next-generation high-strength low-alloy offshore riser steel, X100Q. An instrumented girth weld is conducted with a parallel programme of physical-thermal simulation (Gleeble) to develop heat affected zone (HAZ) test specimens. X100Q is shown to exhibit superior fatigue performance to the current state of the art offshore riser steel, X80. Significant differences are demonstrated between the parent material and simulated HAZ in terms of hardness, monotonic strength and cyclic plasticity response, which can be related to the observed microstructural transformations: the refined grain and bainitic block size in the fine-grained HAZ are shown to give a harder and stronger response than parent material, whereas the coarsened bainitic lath structure in the intercritical HAZ gives a softer and weaker response. The simulated HAZ materials exhibit superior fatigue performance to the parent material and weld metal. A significant reduction in life is shown for cross-weld specimens, indicating susceptibility to failure due to HAZ softening for matched or over-matched X100Q welds.
Funder
Publisher
Elsevier
Publisher DOI
10.1016/j.msea.2020.140728
Rights
Attribution-NonCommercial-NoDerivs 3.0 Ireland